Wiring

114 products

$119.00

This USB/CAN Converter Cable is compatible with the following products: FT400 / FT350 / FT300 / FT250 BoostController 2 GearController Update firmware over CAN port.Tune and backup maps....

$6.00

from $139.00

Use with FT600 / FT550 / FT500 / FT500LITE / FT450 integrated boost controller. Pressure Input: 1/8" NPT Output to Wastegate: 1/8" NPT Recommended injectors (not included):High impedance Bosch 17...

$225.00

Simplify installation of your FTSPARK with our chassis mounting bracket. Available sizes: 1.375", 1.500" and 1.625"

from $9.00

Nylon hose for MAP Sensor 4mm ID for vacuum/pressure hose Available in 10ft or 20ft To use with any FuelTech ECU or FuelTech BoostController

$119.00

The FT550 Connector Kit is recommended for those who have upgraded to the FT550 ECU and want to modify their existing harness for the new FT550 connectors. Kit includes: (2) FT550 Connectors (A &a...

$7.00

Use this kit when building a custom harness while using injectors with Nippon Denso connectors. Kit Includes: Nippon Denso injector connector, (2) terminals, (2) seals.

$6.00

$8.00

$11.00

Use this Sealed Relay Holder Kit to make installation easier when using a Sealed Relay. Comes with (2) 10-12 GA / (2) 18-20 GA terminals.

$11.00

$5.00

BBC Cam Sync Mounting Bracket & Magnet Kit

$159.00

Made for BBC 1" Raised Cam with a belt drive. Must use with Hall Effect Cam Sync Sensor. *Modification may be required to fit your application.

$130.00

Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your firewall. Kit Includes: Male and female connector...

$19.00

High quality sealed relay which is typically used for ECU, injectors, and coils when building your own harness. One relay required per item being wired. Electrical Connections:85 - Trigger - FT aux...

$54.00

$110.00

Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your firewall. Kit Includes: Male and female connector...

$29.00

Use this Sealed Relay Holder to make installation easier when using a Sealed Relay.

from $129.00

Typically used to monitor fuel, oil, and wastegate pressure. *Not compatible with FuelTech complete harnesses such as PRO600, PRO550, LS550, etc. Use PS-150 for these applications. TECHNICAL DESCRI...

from $399.00

Vital data in order to measure whether the turbo is operating within its compressor map and at its highest efficiency. By inputting blade count you can measure rotational speed and maximize your tu...

from $929.95

The technology advance in the motorsport is noticed for the progressive increase of embedded electronics, and that’s a reality on both street and competition. One of the hottest topics nowadays whe...

from $129.00

from $129.00

Typically used for wheelie bar load cells. TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-3000 psi Thread size: 1/8" NPT Connector Pinout: A - Ground B - 5V C - Signal

$6.00

Type K Thermocouple Adapter. Use to connector Racepak thermocouples to FuelTech EGT-8 CAN. *Please note that when using the EGT-8 CAN all the thermocouples will connect to a single box. If using ex...