Ethanol content is a basis for many functions in an engine. The ethanol content as a variable can be the difference between having optimized ignition timing, fuel injection and boost levels when tu...
The VR-HALL converter was designed to read an analog VR signal and transform it to a digital signal (Hall). Recommended when using VR speed sensors (found in most ABS systems) or when using VR fuel...
FuelTech's billet vacuum distribution manifold is the perfect solution for running and organizing all of the vacuum lines on your race car. With 7 vacuum ports there is plenty of room to run all of...
The FuelTech Cylinder Head Temperature Thermocouple offers faster and more accurate temperature reading for engine head temperature.
The ring tip gives the sensor a lower thermal inertia and easier...
The new FuelTech Air/Liquid Thermocouple offers accurate temperature reading for oil, coolant and intake air.Temperature range: 32°F to 2200°FWire lengths: 24”Thread size: 1/8" NPTTip length: .300"...
FuelTech's billet remote pressure sensor mounting block is the perfect solution to mount your pressure sensors in one common place, Each port is individually connected from top to bottom allowing y...
Davis Technologies 32 tooth split collars are the only collars on the market with 32 triggers, providing unparalleled resolution, speed and accuracy. Utilizing 32 precision machined teeth instead o...
Designed to use with FuelTech GearController* to perform powershifts.
Detects knob deformation to cut the ignition
H-pattern, sequential or inline application
CNC machined
*GearController: only c...
Monitor crankcase vacuum inside your engine to make sure piston rings are sealing properly in the cylinders.
Output: 0.5-4.5V
Supply: 5V
Range: -15 psi to +15 psi (0-30 psi absolute)
Thread size: ...
Typically used to monitor nitrous bottle and brake pressure.
TECHNICAL DESCRIPTION
Output: 0.5-4.5V
Supply: 5V
Range: 0-1500 psi
Thread size: 1/8" NPT
Connector Pinout:
A - Ground
B - 5V
C - Sig...
Compatible with the following ECUs:
FT600 / FT550 / FT500 / FT500LITE / FT450
Available in 5/16" and 3/8" diameters.
*Must be used with a magnetic collar.
Whether you are constructing a new aluminum intake manifold or updating your current one, this Weld-On Burst Panel Adapter makes it easy to add a large burst panel to your engine. Check out the vid...
Can be used to read engine RPM or crank triggers. Can also be used to read wheel speed, gearbox speed, etc. with proper trigger wheel.
Connector Pinout:
A - 5-16V
B - Signal
C - Ground
This solid state relay is required when running dual solenoid / big stages of nitrous. One relay required per nitrous stage.
Use with FT600 / F550 / FT500 / FT500LITE / FT450 integrated nitrous con...
Use with FT600 / FT550 / FT500 / FT500LITE / FT450 integrated boost controller.
Pressure Input: 1/8" NPT
Output to Wastegate: 3/8" NPT
Can not be used with CO2. For drag race applications, use ou...
